研究院首页 | 科学研究 | 科研成果 | 论文 | 2012
先进制备加工技术研究所(25篇)
[1]     Jianxin Xie,Huadong Fu,Zhihao Zhang,Yanbin Jiang.Deformation twinning feature and its effects on significant enhancement of tensile ductility in columnar-grained Fee6.5wt.%Si alloy at intermediate temperatures.Intermetallics,2012,23:20-26
[2]     Jianxin Xie,Huadong Fu, Zhihao Zhang,Yanbin Jiang.Deformation twinning in an Fe-6.5 wt.% Si alloy with columnar grains during intermediate temperature compression.Materials Science and Engineering A,2012,528:315-319
[3]     Xinhua Liu,Xuefeng Liu, Yanbin Jiang, Jianxin Xie.Effect of casting temperature on porous structure of lotus-type porous copper.Procedia Engineering,2012,27:490-501
[4]     Zhihao Zhang,Wenping Wang, Huadong Fua, Jianxin Xie.Effect of quench cooling rate on residual stress, microstructure and mechanical property of an Fe-6.5Si alloy.Materials Science and Engineering A,2011,530(15):519-524
[5]     Zhen WANG,Xue-feng LIU,Jian-xin XIE.Effect of γ2 phase evolution on mechanical properties of continuous columnar-grained Cu-Al-Ni alloy.Materials Science and Engineering A,2012,532:536-542
[6]     Xinhua Liu,Xuefeng Liu, Jianxin Xie.Effects of annealing process on interface and mechanical properties of silver clad aluminum wires).Procedia Engineering,2012,27:502-511
[7]     Zhen WANG,Xue-feng LIU, Jian-xin XIE.Effects of solidification parameters on microstructure and mechanical properties of continuous columnar-grained Cu-Al-Ni alloy.Progress in Natural Science-International materials(自然科学进展),2011,21(5):368-374
[8]     Haiyou Huang, Mingjun Nie, Yanyan Luan, Xuefeng Liu, Jianxin Xie..Fatigue Property of Single-Crystal and Columnar-Grained Polycrystalline Cu-12wt.%Al Alloys. .Procedia Engineering,2012,27:1686-1693
[9]     YA-JUN SU, XIN-HUA LIU, HAI-YOU HUANG, XUE-FENG LIU, and JIAN-XIN XIE.Interfacial microstructure and bonding strength of copper cladding aluminum rods fabricated by horizontal core-filling continuous casting.Metallurgical and Materials Transactions A,2011,42(12): 4088-4099
[10]  Zhi-hao Zhang,Wen-rong Hou ,Dong-nan Huang,Jian-xin Xie.Mesh Reconstruction Technology of Welding Process in 3D FEM Simulation of Porthole Extrusion and Its Application.. Procedia Engineering, ,2012, 36: 253-260
[11]  梅俊,刘新华,谢建新.Microstructure and Mechanical properties of BFe10 Cupronickel Alloy Tubes fabricated by a Horizontal Continuous Casting with Heating-Cooling Combined Mold Technology.International Journal of Minerals, Metallurgy and Materials,2012,19(4):339-347
[12]  He Yong, Liu Xuefeng, Wang Zhen, Xie Jianxin.Numerical simulation of dieless drawing process with non-steady processing parameters.稀有金属材料与工程(增刊)(会议),2011,40:179-184
[13]  Liu Xuefeng,Liu Gang,Xie Jianxin.Preliminary study on preparation of black ceramic coating formed on magnesium alloy by micro-arc oxidation in carbon black pigment-contained elect.Procedia Engineering,2012,36:261-269
[14]  Luan Yanyan,Liu Xuefeng,Peng Zhannan,Xie Jianxin.Preparation and mechanism of nano-TiO2 coatings on poly(p-phenylene-benzobisoxazole) (PBO) fiber.Materials Science Forum,2012,724:274-277
[15]  J.H. Li, X.X. Gao , J.X. Xie , C. Yuan , J. Zhu , R.B. Yu.Recrystallization behavior and magnetostriction under pre-compressive stress of FeeGaeB sheets.Intermetallics,2012,26: 66-71
[16]  Yong He,Xuefeng Liu,Fang Qin,Jianxin Xie.Rectifying control of wire diameter during dieless drawing by deformation measuring method of inter-frame displacement.International Journal of Minerals,Metallurgy and Materials,2012,19(7):615-621
[17]  Huang Hai-You, Liu Jin-Ping, Wang Yu, Liu Xue-Feng, Xie Jian-Xin.Tension-compression asymmetry of stress-induced transformations in martensitic Cu-12wt.%Al alloys.Materials Letters,2012,79:51-54
[18]  Wang Y, Huang H Y, Xie J X. .Texture evolution and flow stress of columnar-grained polycrystalline copper during intense plastic deformation process at room temperature.Materials Science and Engineering A,2011, 530(15):418-425.
[19]  Xin-Hua Liua Xue-Feng Liua Jian-Xin Xiea.The Investigation of Fabrication Processing for Lotus-type Porous Magnesium by the In-situ Reaction and Unidirectional Solidification Method.Procedia Engineering,2012,36:270-278
[20]  梅俊,刘新华,谢建新.BFe10白铜管材热冷组合铸型水平连铸凝固温度场模拟.中国有色金属学报,2012,22(5):1430-1439
[21]  王祯,刘雪峰,何勇,谢建新.硅青铜线材无模拉拔工艺与组织性能关系.材料工程,2012,(5):59-63
[22]  王祯,刘雪峰,谢建新.连续柱状晶CuAlNi合金无模拉拔过程中的组织性能演变.金属学报,2012,48(7):867-874
[23]  甘春雷,刘雪峰,黄海友,谢建新.连续柱状晶组织BFe10-1-1合金的电化学腐蚀性能.北京科技大学学报,2011,33(12):1492-1500
[24]  谢建新,王宇,黄海友.连续柱状晶组织铜及铜合金的超延展变形行为与塑性提高机制.中国有色金属学报,2011, 21(10): 2324-2336
[25]  苏亚军,刘新华,吴永福,黄海友,谢建新,王连忠,董晓文.水平连铸直接复合成形铜包铝复合材料的组织与性能. .特种铸造及有色合金,2011,31(9):785-790
 
功能材料研究所(18篇)
[1]     L.F. Hei, F.X. Lu, C.M. Li, W.Z. Tang, G.C. Chen, J.H. Song.A Review on Mechanical Properties of Freestanding Diamond Films.Advanced Materials Research,2012,490-495:3059-3064
[2]     ShenWu, Aizhi Sun,Fuqiang Zhai,Jin Wang,Qian Zhang,Wenhuan Xu,Philip Logan,Alex A.Volinsky.Annealing effects on magnetic properties of silicone-coated iron-based soft magnetic composites.Journal of Magnetism and Magnetic Materials,2012,324(5):818-822
[3]     Jianjun Tian, Shengen Zhang,  Xuanhui Qu, De'an Pan,  Mingxin Zhang.Co-reduction synthesis of uniform ferromagnetic SmCo nanoparticles.Materials Letters,2012, Vol.68:212–214
[4]     L.F. Hei, J. Liu, F.X. Lu, C.M. Li,J.H. Song, G.C. Chen.Effect of growth parameters on single crystal diamond deposition by DC Arc Plasma Jet CVD.Advanced Materials Research,2012,490-495:3094-3099
[5]     Jianjun Tian, Rui Gao, Qifeng Zhang, Shengen Zhang, Yanwei Li, Jolin Lan, Xuanhui Qu, Guozhong Cao.Enhanced Performance of CdS/CdSe Quantum Dot Cosensitized Solar Cells via Homogeneous Distribution of Quantum Dots in TiO2 Film.The Journal of Physical Chemistry C,2012, Vol. 116: 18655-18662
[6]     Aizhi Sun, Shen Wu,  Wenhuan Xu, Jin Wang, Qian Zhang, Fuqiang Zhai, Alex A.Volinsky.Nd2Fe17 nanograins effect on the coercivity of HDDR NdFeB magnets with low boron content.International Journal of Minerals Metallurgy and Materials,2012,19(3):236-239
[7]     Yu, Sheng-Wang; Fan, Peng-Wei; Tang, Wei-Zhong; Li, Xiao-Jing; Hu, Hao-Lin; Hei, Hong-Jun; Zhang, Si-Kai; Lu, Fan-Xiu.Pressure dependence of morphology and phase composition of SiC films deposited by microwave plasma chemical vapor deposition on cemented carbide substrates.Thin Solid Films,2011,520: 828-832
[8]     Jian Wang, Jun Li, Xinfeng Wang, Xiaochuan Mi, Shengen Zhang*, Alex A. Volinsky.Rapid annealing effects on microstructure, texture and magnetic properties of non-oriented electrical steel.Metals and Materials International,2012, Vol. 18(3): 531-537
[9]     Jian Wang, Jun Li, Xinfeng Wang, Xiaochuan Mi, Shengen Zhang.Rapid heating effects on grain-size, texture and magnetic properties of 3% Si non-oriented electrical steel.Bulletin of Materials Science,2011, Vol. 34(7): 1477-1482
[10]  Fuqiang Zhai,Ping Li,Aizhi Sun,Shen Wu,Qi Wan,Weina Zhang,Yunlong Li,Liqun Cui,Xuanhui Qu.Significantly Improved Dehydrogenation of LiAlH4 Destabilized by MnFe2O4 Nanoparticles.The Journal of Physical Chemistry C ,2012,116:11939-11945
[11]  J.J. Wei, Ch.M. Li ∗, X.H. Gao, L.F. Hei, F.X. Lvun.The influence of boron doping level on quality and stability of diamond film on Ti substrate.Applied Surface Science,258 (2012) 6909– 6913
[12]  翟福强,孙爱芝,吴深,王琎,徐文欢,张倩.HDDR NdFeB 磁粉两步法伴温磁场取向制备高性能柔性各项异性NdFeB黏结磁体.北京科技大学学报,2012,34(3):316-321
[13]  黑立富,徐俊波,陈良贤,李成明,吕反修.非对称双极脉冲反应磁控溅射制备TiN/NbN多层膜.材料工程,2012,0(7):92-96
[14]  唐伟忠,于盛旺,范朋伟,李义锋,苏静杰,刘艳青.高品质金刚石膜微波等离子体CVD技术的发展现状.中国材料进展,2012, 31(8): 33-39
[15]  于盛旺,范朋伟,李义锋,刘艳青,唐伟忠.椭球谐振腔式MPCVD装置高功率下大面积金刚石膜的沉积.人工晶体学报,2011, 40(5):1145-1149
[16]  张深根.稀土永磁材料现状及研发方向思考.新材料产业,2011,Vol.215: 48-51
[17]  于盛旺,李晓静,张思凯,范朋伟,黑鸿君,唐伟忠,吕反修.新型MPCVD装置在高功率密度下高速沉积金刚石膜.功能材料,2011,42(9): 1722-1726
[18]  黑立富 刘杰 刘金龙 李成明 宋建华 吕反修.预处理对超纳米金刚石薄膜表面质量的影响.人工晶体学报,2012,41(2):302-305
 
粉末冶金研究所(123篇)
[1]     Rafi-ud-din; Qu Xuanhui; Li Ping; Lin Zhang; Wan Qi; Iqbal, M. Zubair; Rafique, M. Yasir; Farooq, M. Hassan; Islam-ud-din.Superior Catalytic Effects of Nb2O5, TiO2, and Cr2O3 Nanoparticles in Improving the Hydrogen Sorption Properties of NaAlH4.JOURNAL OF PHYSICAL CHEMISTRY C,2012,116(22):11924-11938
[2]     Ren, Shu-bin; Shen, Xiao-yu; Qu, Xuan-hui; He, Xin-bo.Effect of Mg and Si on infiltration behavior of Al alloys pressureless infiltration into porous SiCp preforms. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS,2011,18(6):703-708
[3]     Wu Mao; Chang Lingling; Peng Zirong; Feng Zelong; Yong Weina; Wang Wei; He Xinbo; Qu Xuanhui.Investigation of Al-based Alloys for Brazing SiCp/Al Composites. RARE METAL MATERIALS AND ENGINEERING,2011,40:132-135
[4]     Chen Hui,Jia Cheng-Chang, Li Shang-Jie, Jia Xian, Yang Xia. Selective interfacial bonding and thermal conductivity of diamond/Cu-alloy composites prepared by HPHT technique.International Journal of Minerals, Metallurgy and Materials,2012,19(4):364-371
[5]     Chu, Aimin ; Qin, Mingli; Rafi-ud-din; Jia, Baorui; Lu, Huifeng; Qu, Xuanhui.Effect of urea on the size and morphology of AlN nanoparticles synthesized from combustion synthesis precursors.Journal of Alloys and Compounds,2012,530(7):144-151
[6]     Chu, Aimin,Qin, Mingli,Rafi-Ud-Din,Jia, Baorui,Lu, Huifeng,Qu, Xuanhui.Citric acid-assisted combustion-carbothermal synthesis of well-distributed highly sinterable AlN nanopowders.Journal of the American Ceramic Society,2012,95(8):2510-2515
[7]     Guo Zhimeng, Liu Qing, Yang Weiwei, Guo Leichen.Densification and properties of ODS-iron based alloy.Rare Metals,2012,31(4):339-343
[8]     H.Chen, C.C. Jia, S.J. Li.Effect of Cr addition and processing conditions on interface microstructure and thermal conductivity of diamond/Cu composite.18TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS,2012:1-6
[9]     Hua-Chao Tao, Li-Zhen Fan, Xiaoqin Yan, Xuanhui Qu. .Superior performance of TiO2-graphene nanosheets composites as anode materials for lithium ion batteries. .Electrochimica Acta,2012,69:328-333.
[10]  Hua-Chao Tao, Li-Zhen Fan, Xuanhui Qu.Facile synthesis of ordered porous Si@C nanorods as anode materials for Li-ion batteries..Electrochimica Acta,2012,71:194–200.
[11]  Hua-Chao Tao, Li-Zhen Fan,Yongfeng Mei, Xuanhui Qu.Self-supporting Si/Reduced Graphene Oxide nanocomposite films as anode for lithium ion batteries.Electrochemistry Communications,2011,13(12): 1332–1335
[12]  Hua-Chao Tao, Mian Huang, Li-Zhen Fan, Xuanhui Qu. .Facile fabrication of Si@SiO2/C nanoporous spheres as anode materials for high-performance Li-ion batteries..Solid State Ionics,2012,220: 1-6.
[13]  Hui Chen, Cheng-chang Jia, Shang-jie Li, Xian Jia, and Xia Yang.Selective interfacial bonding and thermal conductivity of diamond/Cu-alloy composites prepared by HPHT technique.International Journal of Minerals, Metallurgy and Materials,2012,19(4): 364-371
[14]  Hui Chen,Chengchang Jia, Shangjie Li.Interfacial characterization and thermal conductivity of diamond/Cu composites prepared by two HPHT techniques.J Mater Sci ,2012,47(7): 3367–3375
[15]  Ji, Ye ; Shao, Huiping; Guo, Zhimeng; Yang, Donghua; Liu, Xiaoting.Preparation and characterization of biocompatible magnetic fluids.Advanced Materials Research,2012,338:384-387
[16]  Jing-Liang Liu, Li-Zhen Fan, Xuanhui Qu.Low temperature hydrothermal synthesis of nano-sized manganese oxide for supercapacitors..Electrochimica Acta,2012,66:302-305.
[17]  Jinkun Liu, Li-Zhen Fan..LiFePO4/porous carbon nanocomposite cathode material for lithium ion batteries. .Materials Science Forum,2012,722: 11-16.
[18]  Kai Yang, Li-Zhen Fan, Jia Guo, Xuanhui Qu. .Significant improvement of electrochemical properties of AlF3-coated LiNi0.5Co0.2Mn0.3O2 cathode materials..Electrochimica Acta,2012,63:363-368.
[19]  L Liu, XL Ni,HQ Yin, XH Qu.Study on Binder System for Micro Powder Injection Molding of ZrO2  Ceramic.Materials Science Forum,2012,706-709:1948-1954
[20]  L. Tan, M. S. Wang, Y. J. Liu, X. C. Xiao, L.-Z. Fan, Y. D. Wang..Synthesis of SnO2 nanorods and hollow spheres and their electrochemical properties as anode materials for lithium ion batteries..Materials Technology: Advanced Performance Materials,2012,27(2):191-195
[21]  Li Ping, Hou Zhonghui, Yang Tai, Shang Hongwei, Qu Xuanhui, Zhang Yanghuan. .Structure and electrochemical hydrogen storage characteristics of the as-cast and annealed La0.8-xSmxMg0.2Ni 3.15Co0.2Al0.1Si0.05 (x=0-0.4) alloys. .Journal of Rare Earths,2012,30(7): 696-704
[22]  Li Yunlong, Li Ping, Zhai Fuqiang, Zhang Weina, Qu Xuanhui. .Hydrogen storage properties of Mg1.7M0.3Ni(M=Mg, La, Ce, Nd) hydrogen storage alloys.Advanced Materials Research,2012,512-515:1503-1508
[23]  LIANG Xuebing, JIA Chengchang, CHU Ke, CHEN Hui.Predicted interfacial thermal conductance and thermal conductivity of diamond/Al composites with various interfacial coatings.RARE METALS, 2011,30(5): 544-549
[24]  Lin Zhang, Xiangdong Wang,Xuanhui Qu.Application Status and Market Analysis of Non-Aero Titanium in China.Key Engineering Materials,2012,520:8-14
[25]  Lin Zhang, Xinbo He, Qin Mingli, Ye Liu, Xuanhui Qu.The influence of Ni on the microstructure of Co-base ODS alloys.Advanced Materials Research,2012,535-537:1011-1014
[26]  Lin, Tao ; Wang, Lisheng; Gao, Zhishan; Guo, Zhimeng  .Ni-based alloy coating on plain-carbon steel by hot dipping process.Advanced Materials Research,2011,361-363:609-614
[27]  Lin, Tao ; Wen, Fang; Liu, Xiangqing; Guo, Zhimeng.SHS-TiC particle reinforced hardface coating prepared by vacuum cladding process.Advanced Materials Research,2012,418-420:932-935
[28]  Lin, Tao; Li, Yanjun;Wu, Chengyi; Guo, Zhimeng.Fine Spherical Tungsten Powder Prepared by Precipitation Reaction.Applied Mechanics and Materials,2012,117-119:967-970
[29]  Liu Xiangqing, Guo Zhimeng, Ma Can, Lin Tao.Microstrcture of MOSI2 Coating with B addition prepared by vacuum cladding.Advanced Materials Research,2012,468-471:2111-2114
[30]  Liu, L.; Ni, X.L.; Yin, H.Q.; Qu, X.H..Study on binder system for micro powder injection molding of ZrO 2 ceramic.Materials Science Forum,2012,706-709:1948-1954
[31]  Liu, Xiaoting; Shao, Huiping; Yang, Donghua; Guo, Zhimeng; Ji, Ye .Fabrication of TiAl alloy powders by high-energy ball milling and low temperature sintering.Advanced Materials Research,2012,338:60-64
[32]  Liu,Qing; Guo, Zhimeng, Wu, Chengyi;Yang Weiwei.Effect of conditions on the hydrothermal synthesis of iron-based oxide dispersion materials.Cailiao Kexue yu Gongyi/Material Science and Technology, ,2011,19(1):226-230
[33]  Li-Zhen Fan, Jing-Liang Liu, Rafi Ud-Din, Xiaoqin Yan, Xuanhui Qu.The effect of reduction time on the surface functional groups and supercapacitive performance of graphene nanosheets..Carbon,2012,50: 3724-3730.
[34]  LU Xin, ZHU Lang-ping, QU Xuan-hui.A Novel Process for Making Spherical Powders of High Nb Containing TiAl Alloys.Key Engineering Material,2012,520:111-119
[35]  LU Xin,ZHU Lang-ping,LIU Cheng-cheng,ZHANG Lin,WU Mao,QU Xuan-hui..Fabrication of Micro-fine High Nb Containing TiAl Alloyed Powders by fluidized bed jet milling.Rare Metal,2012,31(1): 1-6
[36]  Lu, Huifeng, Qin, Mingli, Jiang, Suihe,Chu, Aimin, Zhang, Yan,Qu, Xuanhui.Synthesis of AlN powder from precipitation precursor by carbon thermal reduction in flowing nitrogen.Key Engineering Materials,2012,512-515:24-27
[37]  Mei, Min; He, Xinbo; Qu, Xuanhui; Hu, Haifeng; Zhang, Yudi; Chen, Si'an.Preparation of C/SiC composites by pulse chemical liquid-vapor deposition process. MATERIALS LETTERS,2012,81:36-38
[38]  NIE Junhui, JIA Xiana, JIA Chengchang, LI Yi, ZHANG Yafeng, SHI Na.Friction and wear properties of copper matrix composites reinforced by tungsten-coated carbon nanotubes.RARE METALS,2011,30(6): 657-663
[39]  Qin, M.L.; Chu, A.M.; Lu, H.F.; Jia, B.R.; Zhang, L.; Yin, H.Q.; Qu, X.H..Synthesis of non-oxide ceramic powders by carbothermal reduction of a combustion synthesis precursor.Technical Proceedings of the 2012 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2012,2012:485-487
[40]  Ren, Shubin; Shen, Xiaoyu; Guo, Caiyu; Liu, Nan; Zang, Jianbing; He, Xinbo; Qu, Xuanhui.Effect of coating on the microstructure and thermal conductivities of diamond-Cu composites prepared by powder metallurgy.COMPOSITES SCIENCE AND TECHNOLOGY,2011,71(13):1550-1555
[41]  Shao, Huiping ; Lin, Tao; Luo, Ji; Guo, Zhimeng.Effect of surfactants on modifying the surface of magnetic nanoparticles by thermal decomposition.Advanced Materials Research,2011,335-336:951-955
[42]  Shao, Huiping; Ji, Ye; Liu, Xiaoting; Guo, Zhimeng.Preparation and Investigation of Magnetic Fluid with the Iron Oxide Spent Catalyst.Advanced Materials Research,2012,356-360:2079-2083
[43]  Shen, Xiao-Yu; He, Xin-Bo; Ren, Shu-Bin; Zhang, Hao-Ming; Qu, Xuan-Hui.Effect of molybdenum as interfacial element on the thermal conductivity of diamond/Cu composites.JOURNAL OF ALLOYS AND COMPOUNDS,2012,529:134-139
[44]  Sheng Yanwei;Hao Junjie; Guo Zhimeng; Shao Huiping;Huang Hua.Preparation of Spherical Tungsten Powder by RF Induction Plasma.Rare Metal Materials and Engineering,2011,40(11):2033-2037
[45]  Sheng, Yanwei; Guo, Zhimeng; Hao, Junjie.Characterization of spherical molybdenum powders prepared by RF plasma processing.3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012,2012,482-484:2563-2567
[46]  Shi, Yongliang; Guo, Zhimeng; Hao, Junjie; Lin, Tao;Zengxian.Processing and abrasive wear study of Fe-Al2O3-TiC composite by pressureless Ti-activated reactive melt infiltration.3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012,2012,482-484:933-937
[47]  Suyan Qiao, Li-Zhen Fan.Ordered macroporous carbon/polyaniline nanocomposites as electrodes for supercapacitors..Materials Science Forum,2012,722: 25-30
[48]  Tao, Hua-Chao; Fan, Li-Zhen; Yan, Xiaoqin; Qu, Xuanhui.In situ synthesis of TiO2-graphene nanosheets composites as anode materials for high-power lithium ion batteries.ELECTROCHIMICA ACTA,2012,69:328-333
[49]  Tao, Hua-Chao; Huang, Mian; Fan, Li-Zhen; Qu, Xuanhui.Interweaved Si@SiOx/C nanoporous spheres as anode materials for Li-ion batteries.SOLID STATE IONICS,2012,220:1-6
[50]  Wan Qi, Li Ping, Cui Liqun, Zhang Weina, Li Yunlong, Qu Xuanhui..Research on hydriding reaction kinetics mechanism of Mg 2-xNdxNi (x = 0-0.3) alloys..Advanced Materials Research,2012,512-515:2250-2256
[51]  WANG Jiangyuan; JIA Xian; c; JIA Chengchang; DONG Guixia; ZHANG Yuli; JIA Lei.Dielectric properties of spark plasma sintering AlN-W composite ceramics .RARE METALS,2011,30(6): 633-637
[52]  Wang, Ruixin ; Guo, Zhimeng; Hao, Junjie; Luo, Ji; Xin, Yanjun .Preparation and characterization of macromeritic tungsten powder reduced by ammonium paratungstate at medium temperature.3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012,2012,468-471:2584-2587
[53]  Wang, Wenqin; Hao, Junjie; Guo, Zhimeng; Ye, Qing  .A simple hydrothermal process based on FePO4·2H 2O to synthesize spherical LiFePO4/C cathode material.3rd International Conference on Manufacturing Science and Engineering, ICMSE 2012,2012,476-478:1837-1840
[54]  Xiangqing Liu, Zhimeng Guo.Synthesis of spherical LiNiCoMnO as cathode material for lithium-ion battery via co-precipitation.Progress in Natureal Science:Materials International,2012,22(2):126-129
[55]  Xin Lu, Li-hua Zhao, Lang-ping Zhu, Bin Zhang, Xuan-hui Qu. .High-temperature mechanical properties and deformation behavior of high Nb containing TiAl alloys fabricated by spark plasma sintering.International Journal of Minerals, Metallurgy and Materials,2012,19(4):354-359
[56]  Yang Donghua; Shao Huiping; Guo Zhimeng; Lin Tao; Fan, Fan Lianpeng.Mechanical Properties of Porous Ti-Co Alloy for Medical Application by Gelcasting.Rare Metal Materials and Engineering,2012,40(10):1822-1826
[57]  Yang, Fang; Guo, Zhimeng; Hao, Junjie; Shi, Yongliang  .Self-propagating high-temperature synthesis of TiB2-Ti(C, N) Cermets composite powder.3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012,2012,468-471:1247-1250
[58]  Yao Jun; Qu Xuan-hui; Rafi-ud-din; He Xin-bo; Zhang Lin.Effect of inclusion on high cycle fatigue response of a powder metallurgy tool steel. JOURNAL OF CENTRAL SOUTH UNIVERSITY,2012,19(7):1773-1779
[59]  Yao, J.; Qu, X. H.; He, X. B.; Zhang, L..Fractographic evaluation of high cycle fatigue strength of a high V alloyed powder metallurgy tool steel. POWDER METALLURGY,2012,55(2):95-100
[60]  Yao, Jun; Qu, Xuan-hui; He, Xin-bo; Zhang, Lin.Effect of inclusion size on the high cycle fatigue strength and failure mode of a high V alloyed powder metallurgy tool steel. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS,2012,19(7):608-614
[61]  Ye, Qing; Guo, Zhimeng; Hao, Junjie; Liu, Qing.Effects of surfactants on the characteristics of Y2O3 dispersion phase through hydrothermal synthesis.3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012,2012,468-471:1574-1577
[62]  Ye, Qing; Hao, Junjie ; Guo, Zhimeng; Ru, Minchao.Preparation of low cost Ti-6Al-4V alloy by gelcasting.3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012,2012,468-471:2078-2081
[63]  Ye, Qing; Hao, Junjie; Guo, Zhimeng; Ru, Minchao  .Effects of gelcasting parameters on the solids loading of Ti-6Al-4V.3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012,2012, 468-471:1649-1652
[64]  Yu, Xiao ; Guo, Zhimeng; Hao, Junjie; Yang, Weiwei .The research on ODS iron powder by sol-gel method.3rd International Conference on Manufacturing Science and Engineering, ICMSE 2012,2012, 476-478:1146-1149
[65]  Yuan Xianjie; Zhuo Yuxuan; Yin Haiqing; Guan Jia; Faraz, Khan Dil; Qu Xuanhui.High Velocity Compaction of Aluminum Powders. RARE METAL MATERIALS AND ENGINEERING,2011,40:86-89
[66]  Zang, Jianbing; Wang, Yanhui; Bian, Linyan; Zhang, Jinhui; Meng, Fanwei; Zhao, Yuling; Qu, Xuanhui; Ren, Shubin.Bucky diamond produced by annealing nanodiamond as a support of Pt electrocatalyst for methanol electrooxidation.INTERNATIONAL JOURNAL OF HYDROGEN ENERGY,2012,37(8):6349-6355
[67]  Zang, Jianbing; Wang, Yanhui; Bian, Linyan; Zhang, Jinhui; Meng, Fanwei; Zhao, Yuling; Ren, Shubin; Qu, Xuanhui.Surface modification and electrochemical behaviour of undoped nanodiamonds. ELECTROCHIMICA ACTA,2012,72:68-73
[68]  Zhai, Fuqiang; Li, Ping; Sun, Aizhi; Wu, Shen; Wan, Qi; Zhang, Weina; Li, Yunlong; Cui, Liqun; Qu, Xuanhui.Significantly Improved Dehydrogenation of LiAlH4 Destabilized by MnFe2O4 Nanoparticles.JOURNAL OF PHYSICAL CHEMISTRY C,2012,116(22):11939-11945
[69]  Zhang Lin; He Xinbo; Qu Xuanhui; Din Rafi-Ud; Liu Hengsan; Li Dan; Zhu Hongmin.Microstructural formation in novel Co-base ODS alloys produced by mechanical alloying.Advanced Materials Research,2012,415-417:1136-1139
[70]  Zhang Lin; Liu Hengsan; He Xinbo; Rafi-Ud-Din; Qu Xuanhui; Qin Mingli; Li Zhou; Zhang Guoqing.Thermal evolution behavior of carbides and γ′ precipitates in FGH96 superalloy powder.Materials Characterization, 2012,67:52-64
[71]  Zhang Weina, Li Ping, Zhai Fuqiang, Wan Qi, Cui Liqun, Li Yunlong, Qu Xuanhui..Effect of annealing treatment on gaseous hydrogen characteristics and electrochemical properties of La0.67Mg0.33Ni 2.5CO0.5 alloy electrodes..Advanced Materials Research,2012,512-515:1882-1887
[72]  Zhang, D.Z.; Qin, M.L.; Rafi-Ud-Din; Zhang, L.; Qu, X.H. .Fabrication and characterization of nanocrystalline Nb-W-Mo-Zr alloy powder by ball milling.International Journal of Refractory Metals and Hard Materials,2012,32(5):45-50
[73]  Zhang, Lin; Qu, Xuanhui; He, Xinbo; Rafi-Ud, Din; Qin, Mingli; Zhu, Hongmin.Hot deformation behavior of Co-base ODS alloys.Journal of Alloys and Compounds,2012,512(1):39-46
[74]  季业,邵慧萍,林涛,郭志猛.Preparation of nano-Cu_xFe_(1-x)O·Fe_2O_3 magnetic particles and performance analysis.材料科学与工艺,2011,19(5):85-89
[75]  罗骥,曹慧钦,贾步超,杨薇薇,陈存广.Preparation and properties of the new type copper matrix pantograph slider.复合材料学报,2012,29(4):103-108
[76]  白英龙,吴冲浒,杨霞,徐猛,果世驹.实际初始WC 颗粒尺寸选择的LSW 理论分析.粉末冶金材料科学与工程,2012,17(2):139-146
[77]  白英龙,吴冲浒,杨霞,徐猛,果世驹.纳米粉末溶解法制备粗晶WC-Co 硬质合金.粉末冶金材料科学与工程,2012,17(4):501-507
[78]  白英龙,吴冲浒,杨霞,徐猛,果世驹.粗细晶WC基体对WC-Co非均匀结构显微组织形成的影响.粉末冶金技术,2012,30(2):89-97
[79]  常宇宏,贾成厂.机械合金化与放电等离子烧结制备Fe - Fe3 Al 材料.材料科学与工艺,2012,20(2): 90-95
[80]  董应虎; 何新波; 罗铁刚; 曲选辉.不同类型金刚石原始性能对比研究.矿业研究与开发,2011,31(5):43-57
[81]  关慧,范丽珍,乔素燕,曲选辉.多壁碳纳米管的表面改性及电化学储能.北京科技大学学报,2011,33(11):1387-1390
[82]  胡文波,贾成厂,胡本芙,田高峰,黄虎豹.氩气雾化法制备FGH96 高温合金粉末颗粒的凝固组织.粉末冶金材料科学与工程,2011,16(5): 671-677
[83]  贾成厂,孙兰.工业的牙齿——硬质合金(2).金属世界,2011,5:5-9
[84]  贾成厂,吴立志.粉末冶金高速钢.金属世界,2012,2:5-10
[85]  李发长,李一,柳学全,贾成厂,李楠,霍静,李金普.铁粉纯度和粒径对磷化铁粉软磁复合材料磁性能的影响.功能材料,2012,43(18):1-4
[86]  李发长,李一,柳学全,贾成厂,李楠,李金普,霍静.磷化工艺对铁基软磁复合材料电磁性能的影响.功能材料,2012,43(15):2031-2034
[87]  李一,李金普,贾成厂,柳学全,李发长,李楠.金属有机化学气相沉积W 薄膜*.粉末冶金技术,2011,29(5): 334-338
[88]  李一,李金普,李发长,柳学全,李楠,周武平,贾成厂.碳纤维表面沉积碳化钨膜研究*.粉末冶金技术,2012,30(3): 214-218
[89]  李一,聂俊辉,李楠,柳学全,贾成厂.镍覆膜碳纤维的制备与性能研究.功能材料,2012,43(13):1688-1691
[90]  梁雪冰,贾成厂,裴广林.金刚石盐浴镀覆温度对Al /金刚石复合材料导热性能的影响研究.粉末冶金技术,2011,29(50):367-371
[91]  刘祥庆,郭志猛,高克玮,林涛,张瑞珠.感应熔覆Ni60涂层显微组织及耐蚀性.材料热处理学报,2012,33:96-100
[92]  刘祥庆,郭志猛,马璨,林涛.添加B对包渗法制备MoSi_2涂层显微组织及静态抗氧化性能的影响.粉末冶金工业,2012,22(3):33-37
[93]  刘小婷,邵慧萍,杨栋华,季业,高学绪,郭志猛.17-4PH不锈钢粉末凝胶注模成型工艺的研究.材料科学与工艺,2011,19(1):127-131
[94]  路新,朱郎平,刘程程,赵腾飞,章林,吴茂,曲选辉.铸造Ti-45Al-8.5Nb-0.5(W,B,Y)合金组织均匀化热处理研究.金属热处理,2012,37(5):61-64
[95]  路新,王述超,朱郎平,何新波,郝俊杰,曲选辉.射频等离子体球化TiAl合金粉末特性研究.航空材料学报,2011,31(4): 1-6
[96]  罗骥,曹慧钦,贾步超,杨薇薇,陈存广.新型铜基受电弓滑板材料的制备与性能.复合材料学报,2012,29(2):103-108
[97]  马毅龙,郭志猛,罗骥,杨薇薇,王振明.氧化物弥散强化铁粉在金刚石工具中的应用.金刚石与磨料模具工程,2011,31(5):84-87
[98]  倪海芳,范丽珍.尖晶石型Li4Ti5O12 负极材料的研究进展.硅酸盐学报,2012,40(4):548-554..
[99]  聂俊辉,贾成厂,张亚丰,史娜,李一.机械球磨与放电等离子体烧结制备碳纳米管/ 铜复合材料.粉末冶金工业,2011,21(5): 44-50
[100] 聂俊辉,史娜,张亚丰,贾成厂.镀W 碳纳米管增强Al 基复合材料的力学性能与导电率.粉末冶金技术,2011,29(5):344-350
[101] 聂俊辉,张亚丰,史娜,贾成厂.镀钨碳纳米管增强铜基复合材料的制备及性能.北京科技大学学报,2012,34(7): 823-829
[102] 盛艳伟,郭志猛,郝俊杰,邵慧萍,王玉明.射频等离子体制备球形Mo粉的研究.粉末冶金工业,2011,21(6):6-10
[103] 盛艳伟,郭志猛,郝俊杰,王玉明.射频等离子体制备球形Ti—6Al—4V粉末性能表征.北京科技大学学报,2012,34(2):164-168
[104] 石永亮,郭志猛,方哲成,曾鲜.凝胶离心成形制备YG10硬质合金管.粉末冶金工业,2012,22(2):44-48
[105] 石永亮,郭志猛,方哲成,曾鲜.凝胶离心成型制备316L-TiC复合材料.复合材料学报,2012,29(3):122-126
[106] 石永亮,郭志猛,方哲成,曾鲜.Ti诱导反应熔体无压浸渗法制备(W,Ti)C/Fe复合材料.复合材料学报,2012,29(4):119-124
[107] 孙兰,李长案,贾成厂.放电等离子烧结压力对超细WC-Co硬质合金性能的影响.硬质合金,2012,29(1): 19-23
[108] 谭易明,邵慧萍,季业,林涛,郭志猛.稳定性油基纳米Fe_3O_4磁性流体的制备与性能研究.粉末冶金技术,2012,30(3):163-166
[109] 田常娟,何新波,梅敏,曲选辉.粉末注射成形制备Si_3N_4颗粒增强316L不锈钢 .北京科技大学学报,2011,33(11): 1373-1377
[110] 王闯,张效芬,王长福,王振常,贾成厂.粉末冶金Cu 基金刚石工具的研究现状及进展.粉末冶金技术,2012,30(2): 140-143
[111] 王江源,贾贤,贾成厂,董桂霞.AlN-W复合陶瓷的微波损耗研究.粉末冶金工业,2012,22(1): 43-47
[112] 王文琴,郭志猛,姜冰,叶青,刘金坤,贾磊.碳热还原法制备LiFePO_4/C锂电池正极材料的研究.稀有金属,2012,36(4):578-583
[113] 王雨萍,贾成厂,曲选辉,王林山,汪礼敏.碳的形态对烧结Fe-Cu-C 系材料性能的影响.粉末冶金技术,2011,29(6):425-430
[114] 吴琼,贾成厂,聂俊辉.镀W 碳纳米管增强Mg 基复合材料的力学和电学性能.粉末冶金技术,2012,30(3): 171-176
[115] 徐良,曲选辉,刘一波.Cr-Cu镀层对金刚石-铜复合材料热导率的影响.功能材料,2011,42(5):964-966
[116] 杨栋华,邵慧萍,樊联鹏,林涛,郭志猛.凝胶注模成形多孔Ti-7.5Mo合金的孔隙及力学性能.北京科技大学学报,2011,33(9):1122-1126
[117] 杨栋华,邵慧萍,郭志猛,林涛,樊联鹏.凝胶注模工艺制备医用多孔Ti-Co合金的性能.稀有金属材料与工程,2012,40(10):1822-1826
[118] 袁田,贾成厂,郭宏.金刚石/铜复合材料镀镍工艺的优化.北京科技大学学报,2012,34(8): 926-930
[119] 张昊明,何新波,沈晓宇,刘谦,曲选辉.放电等离子烧结制备非连续石墨纤维/Cu复合材料.粉末冶金材料科学与工程,2012,17(3): 339-344
[120] 张剑波,连芳,高学平,李建刚,范丽珍,何向明.锂离子电池及材料发展前瞻——第16届国际锂电会议评述.中国科学:化学,2012,(8):1252-1262
[121] 张俊才,贾成厂,史延田.MoSi2 -Ti3SiC2复合材料制备及抗氧化性能.粉末冶金技术,2011,29(6): 408-412
[122] 章林,吕元之,邵健,张应波,刘志伟,曲选辉.粘结化铁基粉末的高速压制成形与烧结行为研究.粉末冶金技术,2012,30(1):57-62
[123] 赵腾飞,路新,曲选辉.粉末冶金生物医用Ti合金的研究及应用现状.粉末冶金技术,2012,30(4): 304-310
 
腐蚀控制系统工程研究所(36篇)
 
[1]     Sheng Hai, Dong Chaofang, Xiao Kui,Li Xiaogang. LOCALIZED ELECTROCHEMICAL CHARACTERIZATION OF HIGH STRENGTH ALUMINIUM ALLOY AT THE CRACK TIP IN 3.5%NaCl SOLUTION .ACTA METALLURGICA SINICA,2012,48(4):414-419
[2]     Cheng, X.Q.,Sun,F.L.,Lv,S.J.,Li, X.G..A new steel with good low-temperature sulfuric acid dew point corrosion resistance.Materials and Corrosion,2012,63:598-606
[3]     Dong Chaofang, Xiao Kui, Chen Ting,Li Huiyan,Li xiaogang.Characterization and comparison of conducting polyaniline synthesized by three different pathways .JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION,2011,26(6):1068-1072
[4]     Luo,H., Dong, C.F., Xiao, K., Li, X.G..Characterization of passive film on 2205 duplex stainless steel in sodium thiosulphate solution.Applied Surface Science,2011,258(1):631-639
[5]     Jia, Zhijun, Li, Xiaogang, Du, Cuiwei,Li, Xiaogang.Effect of acetic acid on CO2 corrosion of 3Cr low-alloy steel .MATERIALS CHEMISTRY AND PHYSICS,2012,132(2-3):258-263
[6]     Liu Zhiyong, Wang Changpeng, Du Cuiwei,Li xiaogang.EFFECT OF APPLIED POTENTIALS ON STRESS CORROSION CRACKING OF X80 PIPELINE STEEL IN SIMULATED YINGTAN SOIL SOLUTION .ACTA METALLURGICA SINICA  ,2011,47(11):1434-1439
[7]     Jia, Zhijun, Du, Cuiwei, Liu, Zhiyong,Gao jin,Ki xiaogang.Effect of calcium ions on CO2 corrosion of 3Cr low-alloy steel .ACTA METALLURGICA SINICA-ENGLISH LETTERS  ,2011,24(5):373-380
[8]     Dong, C.F.,Yang, Y.,Luo, H.,Xiao, K.,Li, X.G..Effect of magnetic field on the electropolymerization and corrosion properties of polyaniline (PANI) film.Advanced Manufacturing Technology,2012,472-475: 198-205
[9]     Zou Shiwen, Li Xiaogang, Dong Chaofang.EFFECT OF MOLD ON CORROSION BEHAVIOR OF PRINTED CIRCUIT BOARD-COPPER AND ENIG FINISHED .ACTA METALLURGICA SINICA,2012, 48(6):687-695
[10]  Huang, F.,Li, X.G.,Liu, J.,Qu, Y.M.,Du, C.W..Effects of alloying elements, microstructure, and inclusions on hydrogen induced cracking of X120 pipeline steel in wet H2S sour environment.Materials and Corrosion,2012,63:59-66
[11]  Hu, Y.B.Dong, C.F.,Sun, M.,Xiao, K.,Zhong, P.,Li, X.G..Effects of solution pH and Cl- on electrochemical behaviour of an Aermet100 ultra-high strength steel in acidic environments.Corrosion Science,2011, 46(4):340-345
[12]  Luo, H.,Dong, C.F.,Cheng, X.Q.,Xiao,K.,Li,X.G..Electrochemical behavior of 2205 duplex stainless steel in NaCl solution with different chromate contents.Journal of Materials Engineering and Performance, 2012,21(7):1283-1291
[13]  Lu, Lin, Li, Xiaogang, Gao, Jin.Evaluation of aging behavior of medium density polyethylene in natural environment by principal component analysis .JOURNAL OF APPLIED POLYMER SCIENCE, 2012, 125(1):19-23
[14]  Dong,C.F.,Xiao,K.,Li,X.G.,Cheng,Y.F..Galvanic corrosion of a carbon steel-stainless steel couple in sulfide solutions.Journal of Materials Engineering and Performance,2011,20(9):1631-1637
[15]  Lu lin,Li xiaogang.Improvement of the properties of CuInS2 thin film prepared in sulfate system.Advanced Materials Research,2011,415-417:1611-1614
[16]  Dong,C.F.,Luo,H.,Xiao,K.,Li,X.G.,Cheng,Y.F..In situ characterization of pitting corrosion of stainless steel by a scanning electrochemical microscopy.Journal of Materials Engineering and Performance,2012,21(3): 406-410
[17]  Zhang, Xin, Xiao, Kui, Dong, Chaofang,Wu junsheng,Li xiaogang,Huang yizhong.In situ Raman spectroscopy study of corrosion products on the surface of carbon steel in solution containing Cl- and SO42- .ENGINEERING FAILURE ANALYSIS  ,2011,18(8):1981-1989
[18]  Wang Liwei, Du Cuiwei, Liu Zhiyong,Zheng xiaoxiao,Li xiaogang.INFLUENCES OF Fe3C AND PEARLITE ON THE ELECTROCHEMICAL CORROSION BEHAVIORS OF LOW CARBON FERRITE STEEL .ACTA METALLURGICA SINICA  ,2011,47(10):1227-1232
[19]  K.Xiao,C.F.Dong,H.Luo,Q.Liu,X.G.Li.Investigation on the electrochemical behaviour of copper under HSO3-containing thin electrolyte layers.International journal of electrochemical Science,2012,7:7503-7515
[20]  Xiao Kui, Zhang Xin, Dong Chaofang,Wei dan,Wang chen,.Localized Electrochemical Impedance Spectroscopy Study on the Corrosion Behavior of Fe-Cr Alloy in the Solution with Cl- and SO42- .JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2012,27(1):27-32
[21]  Zhu wei, Gao jin,Li xiaogang, Lin Junli, Cao hanhui, Sun Baitian.Mechanical characteristics of PVA/STMP hydrogel in tensile and unconfined compression.Applied Mechanics and Materials,2012,157-158:1372-1375
[22]  Liu, Z.Y. , Li, X.G., Cheng, Y.F. .Mechanistic aspect of near-neutral pH stress corrosion cracking of pipelines under cathodic polarization.Corrosion Science,2012,55:54-60
[23]  Lu Shengjie, Cheng Xuequn, Li Xiaogang.Pitting Corrosion of 316L Stainless Steel under Low Stress below Yield Strength .JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION  ,2012,27(2):238-241
[24]  Luo, H. ,  Li, X.G., Dong, C.F.,Xiao, K..The electrochemical behaviour of 2205 duplex stainless steel in alkaline solutions with different pH in the presence of chloride.Electrochimica Acta,2012,64:211-220
[25]  董超芳,骆鸿,肖葵,李朴华,李晓刚.316L不锈钢在西沙海洋大气环境下的腐蚀行为评估.四川大学学报,2012,44(3):179-184
[26]  肖葵,董超芳,李晓刚,魏丹.AZ91D镁合金电偶腐蚀的扫描Kelvin探针研究.稀有金属材料与工程,2011,40(9):1589-1593
[27]  生海,董超芳,杨志炜,肖葵,崔中雨,李晓刚.2024-T351铝合金在酸性NaCl溶液中SCC行为的电化学噪声检测.科技导报,2012,30(10):18-23
[28]  汪崧,李晓刚,黄一中,杜翠微.Fe2+对碳钢硫酸盐还原菌腐蚀行为的影响.航空材料学报,2012,32(1):51-56
[29]  李超, 杜翠薇, 刘智勇, 李晓刚.X100管线钢在水饱和酸性土壤中的电化学阻抗谱特征.中国腐蚀与防护学报,2011,31(5):378-380
[30]  李超, 杜翠薇, 刘智勇, 李晓刚, .X100管线钢在酸性土壤模拟溶液中的应力腐蚀行为.腐蚀科学与防护技术,2012,24(4):327-331
[31]  范林, 李晓刚, 杜翠薇, 刘智勇.X80管线钢钝化膜在各种高浓度NaHCO3溶液中的电化学行为.中国腐蚀与防护学报,2012,32(4):322-326
[32]  魏薪,董超芳,肖葵,骆鸿,魏丹,李晓刚.材料生命周期评价方法与应用进展.科技导报,2012,30(14):75-81
[33]  刘安强,肖葵,董超芳,王恩清,魏丹,高瑾,李晓刚.电弧喷涂锌铝伪合金涂层的耐中性盐雾腐蚀性能 .材料保护,2011,44(12):12-15
[34]  邹士文,肖葵,董超芳,李慧艳,李晓刚.霉菌对化学浸银处理印刷电路板腐蚀行为影响.科技导报,2012,30(11):21-26
[35]  闫瑞霞, 杜翠薇, 刘智勇, 李晓刚.敏化态00Cr12Ti的动电位电化学阻抗谱特征研究.中国腐蚀与防护学报,2011,31(6):419-425
[36]  刘智勇, 王长朋, 杜翠薇, 李晓刚.外加电位对X80管线钢在鹰潭土壤模拟溶液中应力腐蚀行为的影响.金属学报,2011,47(11):1434-1439
 
材料失效与控制研究所(54篇)
[1]     Bai, Y; Zheng, GP; Shi, SQ  .Abnormal electrocaloric effect of Na0.5Bi0.5TiO3-BaTiO3 lead-free ferroelectric ceramics above room temperature.MATERIALS RESEARCH BULLETIN,2011, 46(11): 1866-1869
[2]     Dong, Liang; Lu, Minxu; Du, Yanxia; Jiang, Zitao.Analysis of Metro Stray Current Interference on Underground Pipelines with a SACP System by Field Tests and Numerical Simulation.NACE - International Corrosion Conference Series - NACE International - Corrosion Conference and Expo 2012,2012,4:2931-2941
[3]     Sun, X; Su, YJ; Gao, KW; Guo, LQ; Qiao, LJ.Charge accumulation in grain boundary promotes intergranular fracture of lead zirconate titanate piezoceramics under mechanical and electric load.SCRIPTA MATERIALIA ,2012, 66(5): 292-295
[4]     Wu, Yuliang; Liu, Wei; Dai, Jun; Fan, Xuehua; Zhang, Jing; Lu, Minxu.Comparison of corrosion behavior of X65 pipeline steel in CO 2-H2S and CO2 environment at different flow velocities.NACE - International Corrosion Conference Series - NACE International - Corrosion Conference and Expo 2012,2012,2:1686-1697
[5]     Gou, LQ; Shi, XL; Zhao, XM; Bai, Y; Qiao, LJ.Composite diamond-DLC coated nanoprobe tips for wear resistance and adhesion reduction.SURFACE & COATINGS TECHNOLOGY,2012, 206(19-20): 4099-4105
[6]     Xie, Yun; Xu, Lining; Gao, Chunliang; Chang, Wei; Lu, Minxu.Corrosion behavior of novel 3%Cr pipeline steel in CO2 Top-of-Line Corrosion environment. Materials and Design,2012,36:54-57
[7]     Qiao, LJ; Gao, KW; Volinsky, AA; Li, XY.Discontinuous surface cracks during stress corrosion cracking of stainless steel single crystal.CORROSION SCIENCE,2011, 53(11): 3509-3514
[8]     Guo, LQ; Li, M; Shi, XL; Yan, Y; Li, XY; Qiao, LJ.Effect of annealing temperature on the corrosion behavior of duplex stainless steel studied by in situ techniques.CORROSION SCIENCE,2011, 53(11): 3733-3741
[9]     Wang, YA; Li, JX; Yan, Y; Qiao, LJ.Effect of electrical current on tribological behavior of copper-impregnated metallized carbon against a Cu-Cr-Zr alloy.TRIBOLOGY INTERNATIONAL,2012, 50: 26-34
[10]  Wang, YA; Li, JX; Yan, Y; Qiao, LJ.Effect of pv factor on sliding friction and wear of copper-impregnated metallized carbon.WEAR,2012, 289: 119-123
[11]  Dai, Jun; Liu, Wei; Wu, Yuliang; Fan, Xuehua; Yang, Min; Lu, Minxu.Effect of sand in fluids at different velocities on CO2 erosion corrosion behavior of X70 steel under high temperature and high pressure.NACE - International Corrosion Conference Series - NACE International - Corrosion Conference and Expo 2012, 2012,2:1713-1726
[12]  Wang, YA; Li, JX; Yan, Y; Qiao, LJ.Effect of surface film on sliding friction and wear of copper-impregnated metallized carbon against a Cu-Cr-Zr alloy.APPLIED SURFACE SCIENCE,2012, 258(7): 2362-2367
[13]  Xu, Lining; Xie, Yun; Lu, Minxu; Zhang, Lei; Chang, Wei.Effect of temperature on wet CO2 corrosion of 3%Cr pipeline steel.NACE - International Corrosion Conference Series - NACE International - Corrosion Conference and Expo 2012,2012,4:2783-2791
[14]  Wang, Jing; Xu, Lining; Zhang, Lei; Lu, Minxu; Chang, Wei; Guo, Hong.Effect of temperature to crevice corrosion of austenitic and duplex stainless steel in deepwater.NACE - International Corrosion Conference Series - NACE International - Corrosion Conference and Expo 2012,2012,4:2881-2891
[15]  Wang, Jing;Lu, Minxu; Zhang, Lei; Chang, Wei; Xu, Lining; Hu, Li-hua.Effect of welding process on the microstructure and properties of dissimilar weld joints between low alloy steel and duplex stainless steel.International Journal of Minerals, Metallurgy and Materials,2012,19(6):518-524
[16]  Wang, YA; Li, JX; Qiao, LJ.EFFECTS OF ELECTRICAL CURRENT AND ITS POLARITY ON THE PROPERTIES OF FRICTION AND WEAR OF COPPER-IMPREGNATED METALLIZED CARBON.ACTA METALLURGICA SINICA,2012, 48(4): 480-484
[17]  Cai, Feng; Liu, Wei; Fan, Xuehua; Lu, Minxu; Zhang, Jing; Du, Qing .Electrochemical corrosion behavior of X70 pipeline steel in wall jet zone under jet impingement at high temperature and high pressure CO2 environment.NACE - International Corrosion Conference Series - NACE International - Corrosion Conference and Expo 2012,2012,3:2050-2065
[18]  Bai, Y; Ding, K; Zheng, GP; Shi, SQ; Qiao, LJ.Entropy-change measurement of electrocaloric effect of BaTiO3 single crystal.PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE,2012, 209(5): 941-944
[19]  Ding, Kai; Bai, Yang; Han, Xi; Zhang, Wenjie; Qiao, Lijie.Estimate of thermodynamic indirect measurement on the electrocaloric effect.Key Engineering Materials,2012, 492: 164-167
[20]  Zhang, Lei; Zhong, Wen; Yang, Jianwei; Gao, Chunliang; Ding, Jinhui; Lu, Minxu.Evolution of corrosion scale of pipeline steel under high H2S/CO2 partial pressure.NACE - International Corrosion Conference Series - NACE International - Corrosion Conference and Expo 2012,2012,4:2792-2798
[21]  He, D. Y.; Qiao, L. J.; Volinsky, Alex A..Humidity effect on BaTiO3 c-domain surface potential inversion induced by electric field.JOURNAL OF APPLIED PHYSICS,2011,110(7): 074104
[22]  Yao, Y.; Qiao, L. J.; Volinsky, Alex A..Hydrogen effects on stainless steel passive film fracture studied by nanoindentation.CORROSION SCIENCE,2011, 53(9): 2679-2683
[23]  He, YI; Yan, YJ; Qiao, LJ; Volinsky, AA.In situ transmission electron microscopy study of alpha-brass nanoligament formation, microstructure evolution and fracture.SCRIPTA MATERIALIA,2012, 65(5): 444-447
[24]  Yuan, WJ; Zhang, ZL; Su, YJ; Qiao, LJ; Chu, WY.Influence of specimen thickness with rectangular cross-section on the tensile properties of structural steels.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2012, 532: 601-605
[25]  Du, XS; Su, YJ; Li, JX; Qiao, LJ; Chu, WY  .Inhibitive effects and mechanism of phosphates on the stress corrosion cracking of brass in ammonia solutions.CORROSION SCIENCE,2012, 60: 69-75
[26]  Zhang, Lei; Wang, Xinru; Wen, Zhibin; Liu, Zhide; Li, Xiangyang; Lu, Minxu.Interactive effects of H2S and elemental sulfur on corrosion of steel.NACE - International Corrosion Conference Series - NACE International - Corrosion Conference and Expo 2012,2012,6:4635-4641
[27]  Kalbarczyk, M., Liskiewicz, T.岩雨, Neville, A.Ion release during fretting at taper joint interface of hip joint prosthesis.Tribology - Materials, Surfaces and Interfaces,2011, 5:107-113
[28]  Bai, Yang; Xu, Fang; Qiao, Li-jie.Left-handed properties of a composite structure with metallic wires in a homogeneous Lorentz medium.INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS,2012, 19(2): 159-164
[29]  Zhang, Jinzhu; Du, Yanxia; Lu, Minxu.Numerical Modeling of Cathodic Protection Applied to Deep Well Casings .NACE - International Corrosion Conference Series - NACE International - Corrosion Conference and Expo 2012,2012,4:2871-2880
[30]  Li, M; Qiao, LJ; Chu, WY; Volinsky, AA.Water pre-adsorption effect on room temperature SnO2 nanobelt ethanol sensitivity in oxygen-deficient conditions.SENSORS AND ACTUATORS B-CHEMICAL ,2011,158(1): 340-344
[31]  Chen, Qiang; Li, Jinxu; Zhang, Lihui; Bai, Yang; Su, Yanjing; Qiao, Lijie; Volinsky, Alex A..Preparation and characterization of lead-free piezoelectric ceramics.Key Engineering Materials,2012, 492: 189-193
[32]  Sun, X; Su, YJ; Li, X; Gao, KW; Qiao, LJ.Stability of nano-scale ferroelectric domains in a LiNbO3 single crystal: The role of surface energy and polar molecule adsorption.JOURNAL OF APPLIED PHYSICS,2012, 111(9): 094110
[33]  Du, Yanxia; Zhang, Lei; Lu, Minxu; Lu, Yi .Study on Cathodic Protection of Submarine Pipeline in Deep-water Environment.NACE - International Corrosion Conference Series - NACE International - Corrosion Conference and Expo 2012,2012,4:2971-2979
[34]  Jiang, Zitao; Lu, Minxu; Du, Yanxia; Dong, Liang.Study on Factors Influencing the Mitigation of AC Interference .NACE - International Corrosion Conference Series - NACE International - Corrosion Conference and Expo 2012,2012,4:2892-2903
[35]  Du, Yanxia; Lu, Minxu; Liu, Jia; Lu, Yi.Study on the Cathodic Protection Test Probe for Buried Steel Pipeline .NACE - International Corrosion Conference Series - NACE International - Corrosion Conference and Expo 2012,2012,4:2989-2999
[36]  Sun, X; Su, YJ; Gao, KW; Guo, LQ; Qiao, LJ ; Chu, WY; Zhang, TY.Surface Potential Distribution in an Indentation- Pre-Cracked BaTiO3 Single Crystal.JOURNAL OF THE AMERICAN CERAMIC SOCIETY ,2011, 94(12): 4299-4304
[37]  Guo, Shaoqiang; Xu, Lining; Chang, Wei; Zhang, Lei; Hu, Lihua; Lu, Minxu.The anti-pitting mechanism of low Cr alloy steel in CO2 corrosion environment.NACE - International Corrosion Conference Series - NACE International - Corrosion Conference and Expo 2012,2012,4:2849-2859
[38]  Bai, Y; Ding, K; Zheng, GP; Shi, SQ; Cao, JL; Qiao, LJ.The electrocaloric effect around the orthorhombic-tetragonal first-order phase transition in BaTiO3.AIP ADVANCES ,2012, 2(2): 022162
[39]  Bai, Yang; Ding, Kai; Zheng, Guang-Ping; Shi, San-Qiang; Qiao, Liejie; Guo, Dong.The electrocaloric effect in BaTiO3 thick film multilayer structure at high electric field.Key Engineering Materials,2012, 512-515: 1304-1307
[40]  Bai, Y; Zheng, GP; Ding, K; Qiao, LJ; Shi, SQ; Guo, D.The giant electrocaloric effect and high effective cooling power near room temperature for BaTiO3 thick film.JOURNAL OF APPLIED PHYSICS,2011,110(9): 094103
[41]  Li, M; Guo, LQ; Qiao, LJ; Bai, Y.The mechanism of hydrogen-induced pitting corrosion in duplex stainless steel studied by SKPFM.CORROSION SCIENCE,2012, 60: 76-81
[42]  Wang, WW; Su, YJ; Yan, Y; Li, JX; Qiao, LJ; Chu, WY; Wang, XK; Xing, Y.The role of hydrogen in stress corrosion cracking of 310 austenitic stainless steel in a boiling MgCl2 solution.CORROSION SCIENCE,2012, 60: 275-279
[43]  Bai, Yang; Xu, Fang; Qiao, Lijie.The twice ferromagnetic resonance in hexagonal ferrite single rod and paired rods.PHYSICS LETTERS A,2012, 376(4): 563-565
[44]  Guo, LQ; Zhao, XM; Bai, Y; Qiao, LJ.Water adsorption behavior on metal surfaces and its influence on surface potential studied by in situ SPM.APPLIED SURFACE SCIENCE ,2012, 258(22): 9087-9091
[45]  覃慧敏, 许立宁, 常炜,路民旭,张雷.pH稳定剂抑制管道潮湿CO2腐蚀的研究进展.腐蚀与防护,2011, 32(11):845-848
[46]  许立宁, 覃慧敏, 常炜,张雷,路民旭,李少飞.X70管线钢在含CO2湿天然气环境下腐蚀行为.北京科技大学学报,2011, 33(12):1478-1484
[47]  陈太辉, 许立宁, 常炜,路民旭,张雷.Cr含量和温度对低Cr管线钢抗CO2腐蚀的影响.天然气工业,2011, 31(9):1-5
[48]  程彤 付山林 齐永明 曹备 杨涛.电气化铁路对埋地钢质燃气管道的交流干扰研究.管道技术与设备,2012,4:37-39
[49]  蔡峰,柳伟,樊学华,路民旭,.流体喷射条件下金属材料冲刷腐蚀的研究进展.摩擦学学报,2011,31(5): 521-527
[50]  陈太辉, 许立宁, 常炜.耐CO2腐蚀低Cr管线钢的研究进展.腐蚀科学与防护技术,2011, 23(5):451-452
[51]  谢云,许立宁,常炜,路民旭.湿气温度对3Cr管线钢CO2腐蚀行为的影响.腐蚀与防护,2012, 33(2):93-97
[52]  许立宁,陈太辉,常炜,路民旭,张雷.温度对3%Cr管线钢CO2腐蚀产物膜的影响.北京科技大学学报,2012, 34(2):149-156
[53]  许立宁, 王兴, 常炜, 路民旭.用分子动力学模拟苯并咪唑类化合物在铁表面的吸附”.腐蚀与防护,2012, 33(4):284-288
[54]  杜艳霞,路民旭,孙健民.油气输送厂站阴极保护相关问题及解决方案.煤气与热力,2011,31(11):B01-B07
 
表面科学与技术研究所(42篇),
[1]     Zhangjin, Lan Sha,He Yedong.Al2O3/Au Composite coating on Stainless steel prepared by electro-deposition .Rare Metal Materials and Engineering,2012,41(S1):108-112
[2]     Deren Wang.Alumina and Zirconia laminar Coating Prepared by Complex Electrolytic Deposition Method.Advanced Materials Research,2012, 538-541: 391-396
[3]     C. Ren, Y.D. He, D.R. Wang.Cyclic oxidation behavior and thermal barrier effect of YSZ–(Al2O3/YAG) double-layer TBCs prepared by the composite sol–gel method.Surface & Coatings Technology,2011, 206:1461–1468
[4]     Xiaoxu Ma, Yedong He, Junpin Lin, Deren Wang, Jin Zhang.Effect of a magnetron sputtered (Al2O3–Y2O3)/ (Pt–Au) laminated coating on hot corrosion resistance of 8Nb–TiAl alloy.Surface & Coatings Technology,2012,206:2690–2697
[5]     Yan Zhenwei, Meng Huimin.Effect of different shapes of the Titanium based on IrO2-Ta2O5 coatings anode.Rare Metal Materials and Engineering,,2012, 41(5): 0772-0775.
[6]     Yan Zhenwei, Meng Huimin.Effect of heat treatment of the Titanium substrates on the properties of IrO2-Ta2O5 coated anode.Rare Metals,2011, 30(5):439-446
[7]     Wang Guan,Hongying Yu, Ying Jin, Dongbai Sun.Effect of pickling on plating porosity and related electrochemical test.Surface Engineering,2012,28(6):430-434
[8]     Li-Bin Mo, Sen Chen, Dong Guo, Jiang-Li Cao.Effects of Additives on Semiconduction Transformation in Lead Zirconate Titanate Ceramic Induced by Atomic Hydrogen.Applied Mechanics and Materials,2012,567, 162-165
[9]     Wen, Yu-Qing; Meng, Hui-Min; Shang, Wei; Jiang, Xiu-Juan.Electrochemical characteristics of the rare earth compound coating on 6061 aluminum alloy.Applied Mechanics and Materials,2011,71-78:2361-2365.
[10]  Zhao Ge, Wang Jinwei, Liu jian.Electrochemical performance of MLPB-PEG400/LiCIO4 solid polymer electrolyte.Electronic Components & Materials,2011,30(9):36-9
[11]  Junguo Gao, Yedong He, Wei Gao.Electro-codeposition of Al2O3–Y2O3 composite thin film coatings and their high-temperature oxidation resistance on γ-TiAl alloy.Thin Solid Films,2012,520:2060–2065
[12]  Xiaoxu Ma, Yedong He, Deren Wang, Jin Zhang.Enhanced high-temperature corrosion resistance of (Al2O3–Y2O3)/Pt micro-laminated coatings on 316L stainless steel alloy.Corrosion Science, 2012,54: 183–192
[13]  Ruimin Zhang, Jinwei Wang, Minjia Wang, Yedong He.Fabrication of Honeycomb Polyvinyl Butyral Film Under.Journal of Applied Polymer Science,2012,124:495–500
[14]  Yuping Zhu1, Yedong He and Deren Wang.High Temperature Corrosion of M-40Cr-0.5Ce Alloys as Inert Anodes in Aluminium Electrolysis.Materials Science Forum,2011,696:254-259
[15]  Chao Ren, Yedong He, Deren Wang.High-temperature cyclic oxidation behavior of Al2O3–YAG composite coating prepared by EPD and microwave sintering.Applied Surface Science,2012,258:5739– 5745
[16]  Xiaoxu Ma,Yedong He, Deren Wang, Junpin Lin and Wei Gao.High-temperature Oxidation Resistance of Al2O3-Au Laminated Composite Coating Prepared on TiAl-based Alloy.High Temp. Mater. Proc.,,2012, 31:163–172
[17]  ZishuanFan,Hongying Yu, Xudong Wang.Investigation of Molybdenum Based Amorphous and Nanocrystalline Coatings Prepared by High Velocity Oxy-Fuel Spraying.RARE METALS,2012, 34(4):355 -361
[18]  XiangHua Kong, Jin Tang, RuiHong Sun, QingGuo Liu.MgO-PSZ solid state electrolyte tubes for metallurgical oxygen sensors made by powder injection moulding.Advanced Materials Research, 2012.366:249-252
[19]  Guanghong Zhao, Yedong He.Plasma electroplating Ni coating on pure copper sheet—the effects of H2SO4 concentration on the microstructure and mechanical properties.Surface & Coatings Technology,2012, 206:4411–4416
[20]  Pengfei Gu, Xudong Wang, Tao Li, Huimin Meng, Hongying Yu, Zishuan Fan.Synthesis, characterization and photoluminescence of ZnO spindles by polyvinylpyrrolidone-assisted low-temperature wet-chemistry process.Journal of Crystal Growth,2012,338(1):162–165
[21]  Nan Jiang,Hui-Min Meng.The durability of different elements doped manganese dioxide-coated anodes for oxygen evolution in seawater electrolysis.Surface & Coatings Technology,2012,206(21):4362-4367
[22]  张津,郭海明,李洪,何业东.32Cr2MoV钢表面电泳沉积氧化铝和氧化锆涂层.中国表面工程,2012.115(4):68-73
[23]  孔祥华,唐晋,孙瑞虹,孙彦辉,孙华,袁国华,李翔.CrMo合金冷镦钢开裂机理研究.四川冶金,2011,33(4): 23-28
[24]  朱宇平,何业东,王德仁.Fe-40Cr-2Ce合金阳极900℃氧化及电解腐蚀行为.材料热处理学报,2011,32(11):117-140
[25]  赵 鸽,王金伟,刘 建.MLPB-PEG400/LiClO4 固体聚合物电解质.电子元件与材料,2011,30(9):36-9
[26]  李美玲,孔祥华,卢瑶,王更超,王晓峰,尤政.Mn3O4电极的制备及电化学性能研究.电子元件与材料,2012.31(6):19-21
[27]  孔祥华,唐晋,孙瑞虹,赵广宏,孙彦辉,袁国华,孙华,李翔.SCM440钢表面脱碳与开裂.材料热处理学报,2012, 33(3):142-145
[28]  汤波楷,何业东,曹江利,唐涛,饶咏初.Al2O3/Au/Al2O3层状阻氚薄膜.材料热处理学报,2012,33(7):132-136
[29]  刘鹏,王旭东,蔡健平,汤智慧.A100钢低氢脆刷镀镉镀层海洋环境腐蚀行为研究.材料工程,2012,(6):54–58
[30]  王莹,俞宏英,程远,单海涛,孙冬柏.X80钢在不同土壤模拟溶液中的腐蚀行为.材料工程,2012,(1):25-28
[31]  王德仁,陈亮,何业东.不锈钢表面振动冲击加速渗铝工艺研究.材料热处理学报,2012, 33(2): 132-136
[32]  刘敏,樊自拴.电弧喷涂制备Fe65Cr20Mo7B3.5SiMn1.5W3涂层.中国表面工程,2012,25(1):60-64
[33]  张津,何业东,王德仁.基于创造基本策略培养创新人才的教学实践,.高等理科教育,2011:73-75
[34]  郭学博,张津,李峰.搅拌摩擦焊内部残余应力无损测试研究进展.理化检验(物理分册),2012,48(4):228-233
[35]  孔祥华,孙瑞虹,唐晋,赵广宏,孙彦辉.两相区冷速对齿轮钢20CrMnTi带状组织的影响.材料热处理学报,2012, 33(4):91-94
[36]  高磊,吕维玲,曹江利.埋地热力管道Q235钢盐碱土腐蚀现场试验研究.腐蚀与防护,2012,33(6),474-477
[37]  高磊,吕维玲,曹江利.埋地热力管线Q235钢在北京土壤模拟溶液中的腐蚀行为.材料保护,2012,45(401),54-57
[38]  赵广宏,何业东.脉冲参数对等离子电沉积镍镀层结构和性能的影响.材料热处理学报,2012,33(8):115-120
[39]  陈姗姗,樊自拴,俞宏英,王旭东.气保焊非晶纳米晶堆焊层的研究.热喷涂技术,2011,3(4):36-41
[40]  胡守天,孔祥华,杨皓,孙瑞虹,何业东 .取向硅钢用特种氧化镁的应用研究.材料热处理学报,2011, 32(10): 134-136
[41]  张涛,王德仁,何业东.微波热处理制备硅化物涂层及其抗高温氧化性能.材料热处理学报,2011, 33(12): 125-131
[42]  刘在龙,孔祥华,李文浩,王更超,李美玲.用田口方法确定U75V重轨钢脱碳关键影响因素的研究.河北冶金,2012.7:9-12
 
 
北京科技大学新材料技术研究院   地址:北京市海淀区学院路30号   邮编:100083 返回学校首页