王金伟
姓名:王金伟
所在系所:表面科学与技术研究所
职称:副教授
通信地址:北京市海淀区学院路30号北京科技大学新材料技术研究院
邮编:100083
办公地点:腐蚀楼303
办公电话:
邮箱: Wangjw@ustb.edu.cn
个人简介
研究方向
科研业绩
近年代表性论文:(*通讯作者)
1. J. Yang, J. Wang*, J. Guan, Morphology, abrasion and corrosion resistance study of the plasma electrolytic oxidation films formed on pure titanium by adding silane in the electrolyte, Applied Physics A-Materials Science & Progressing, 126 (2020)288-297.
2. J. Wang*, X. Guo, D. Wu, Flexible epoxy composite coatings modified by reactive rubber with improvements in water and corrosive resistances, Journal of Polymer Engineering, 40 (2020) 57-66.
3. Y. Wang, J. Wang*, Preparation of silica/epoxy hybrid polymers as sealing layers on ceramic coatings and their stability study upon thermal treatment, Journal of Applied Polymer Science, 136 (2019) 47481.
4. J. Wang*, Y. Ma, J. Guan, D. Zhang, Characterizations of anodic oxide films formed on Ti6A14V in the silicate electrolyte with sodium polyacrylate as an additive, 338 (2018) 14-21.
5. J. Guan, J. Wang*, D. Zhang, Nickel electroplating on copper pre-activated Al alloy in the electrolyte containing PEG(1000) as an additive, Applied Physics A-Materials Science & Progressing, 124 (2018) 436.
6. D. Wu, J. Wang*, Preparation and characterizations of RTV epoxy blends using amide maleic anhydride-g-liquid polybutadience as both reactive toughening and curing components, Journal of Applied Polymer Science, 135 (2018) 45985.
7. L. Gao, J. Wang, Thermal, mechanical, and dielectric studies on the DGEBA epoxy blends by using liquid oxidized poly(1,2-butadiene) as a reactive component, Journal of Applied Polymer Science, 134 (2017) 44689.
8. J. Wang*, Q. Wu, The effects of anodic interlayer on the morphology and mechanical performances of electroless Ni-P coating on Al alloy, Applied Physics A-Materials Science & Progressing, 123 (2017) 435.
9. J. Wang*, Y. Tian, J. Zhang, Thermal insulating epoxy composite coatings containing sepiolite/hollow glass microspheres as binary fillers: morphology, simulation and application, Science and Engineering of Composite Materials, 24 (2017) 379-386.
10. S. Huo, J. Wang*, X. Wu, Morphology, thermal and mechanical performances of SR composites containing sepiolite and HGMs as binary fillers, Journal of Polymer Engineering, 37 (2017) 197-204.
11. J. Wang*, J. Chen, The Effect of Silane on the Microstructure, Corrosion, and Abrasion Resistances of the Anodic Films on Ti Alloy, Journal of Materials Engineering and Performance, 25 (2016) 1594-1602.
12. H. Yuan, J. Wang*, J. Chen, Phosphate coating on stainless steel prepared in electrolyte with silica sol: Zinc segregation, post-treatment and corrosion resistance, Corrosion Engineering, Science and Technology, 49 (2014) 197-203.
13. J. Chen, J. Wang*, H. Yuan, Morphology and performances of the anodic oxide films on Ti6Al4V alloy formed in alkaline-silicate electrolyte with aminopropyl silane addition under low potential, Applied Surface Science, 284 (2013) 900-906.
14. J. Wang*, G. Zhao, Conductive performances of elastomeric electrolytes based on maleic nhydride-g-poly(1,2-butadiene) grafting polyethylene glycol 400 and LiClO4, Journal of Applied Polymer Science, 128 (2013) 2408-2413.
15. F. Zhu, J. Wang*, S. Li, J. Zhang, Preparation and characterization of anodic films on AZ31B Mg alloy formed in the silicate electrolytes with ethylene glycol oligomers as additives, Applied Surface Science, 258 (2012) 8985-8990.
16. R. Zhang, J. Wang *, M. Wang, Y. He, Fabrication of honeycomb polyvinyl butyral film under humidity provided by super saturated salt solutions, Journal of Applied Polymer Science, 124 (2012) 495-500.
17. J. Wang*, J. Tang, Y. He, Top coating of low-molecular weight polymer MALPB used for enhanced protection on anodized AZ31B Mg alloys, Journal of Coatings Technology and Research, 7 (2010) 737-746.
18. Y. Li, J. Wang*, J. Tang, Y. Liu, Y. He, Conductive performances of solid polymer electrolyte films based on PVB/LiClO4 plasticized by PEG(200), PEG(400) and PEG(600), Journal of Power Sources, 187 (2009) 305-311.
19. J. Wang*, L Chen, Y He, Preparation of environmental friendly coatings based on natural shellac modified by diamine and its applications for copper protection, Progress in Organic Coating, 62 (2008) 307-312.
20. 王金伟, 张达威, 海泡石/空心微珠/环氧树脂复合涂层在镁合金表面的隔热性能研究, 涂料技术与文摘, 38 (2017) 12-16.
近年代表性专利:
1. 王金伟,吴欣雨,霍珊珊,一种高性能环保型导电涂料的制备方法,CN104774512A.
2. 王金伟,唐金伟,李丙霞,一种环保型耐腐蚀涂料及其制备方法,CN101289591.
3. 王金伟,陈磊,一种虫胶改性制备环保型涂层材料的方法,ZL200510086579.
4. 王金伟,陈磊,一种环保型耐腐蚀涂料的制备方法,ZL200610112787.6 (转让)
5. 王金伟,唐金伟,一种环保型耐腐蚀涂料及其制备方法,ZL200810114813.8
6. 王金伟,吴欣雨,霍姗姗,一种高性能环保型导电涂料的制备方法, ZL201510162098.5