【个人简介】

岳小琪，1992年生，工学博士。2015年本科毕业于北京科技大学材料科学与工程专业，2020年博士毕业于北京科技大学新材料技术研究院腐蚀与防护中心，曾任国际腐蚀工程师协会（NACE International）中国学生分会主席（2016-2017，2018-2019）。2018-2019年曾获国家留学基金委资助赴英国利兹大学IFS实验室访学；2020年曾获广东省优秀青年培养计划（派出项目），2021-2024年就职于瑞典皇家理工腐蚀与表面科学系。近5年主持国家自然科学基金青年项目、博士后基金、Karl Engvers stiftelse 基金、宝钢合作项目、中海石油合作项目等8相；参与国家重点研发计划、瑞典研究项目(VR)、创新项目(Vinnova)等10项。参与包括MAX IV、DESY、Diamond/ISIS在内的同步辐射光源测试操作超过500小时。近5年发表包括材料、腐蚀、工程学科论文36篇。以署名第一作者发表SCI论文16篇。腐蚀机理与预测研究成果已应用于深地深海选材，并应用于宝钢、Alleima(原Sandvik)、Uddeholm等跨国钢铁公司高强不锈钢、镍/铁镍基合金和微米级手撕不锈钢的成分工艺改进以及新材料研发。

【研究方向】

1. 同步辐射光源腐蚀与表面科学研究
2. 极限深地工况（超高温、超高压、超高氯离子浓度、复杂应力）下材料服役研究
3. 钢铁材料氢脆机理与抗氢设计
4. 绿色安全地下封存研究

【科研业绩】

发表论文

[1] Yue X, Pan J, et al. Unveiling nano-scale chemical inhomogeneity in surface oxide films formed on V- and N-containing martensite stainless steel by synchrotron X-ray photoelectron emission spectroscopy/microscopy and microscopic X-ray absorption spectroscopy [J].  Journal of Materials Science & Technology , 2025, 205, 191-203.

[2] Yue X, Pan J, et al. In depth analysis of the passive film on martensitic tool alloy: Effect of tempering temperature [J].  Corrosion Science , 2024, 234,112133.

[3] Yue X, A Larsson, H Tang, A Grespi, M Scardamaglia, A Shavorskiy, Pan J, et al. Synchrotron-based near ambient-pressure X-ray photoelectron spectroscopy and electrochemical studies of passivation behavior of N-and V-containing martensitic stainless steel [J].  Corrosion Science , 2023, 111018.

[4] Yue X, Zhang L, Pan J, et al. Effect of hydrogen on the passivation for ultra-thin 316L SS foil [J].  npj Materials Degradation , 2023, 7 (1), 79.

[5] Yue X, Malmberg P, Leygraf C, Pan J, et al. Penetration of corrosive species into copper exposed to simulated O2-free groundwater by time-of-flight secondary ion mass spectrometry (ToF-SIMS) [J].  Corrosion Science , 2023, 110833.

[6] Yue X, Zhang L, Pan J, et al. Passivation characteristics of ultra-thin 316L foil in NaCl solutions [J].  Journal of Materials Science & Technology , 2022, 127, 192-205.

[7] Yue X, Zhang L, Hua Y, et al. Uncoupling chloride and acidification attack on the naturally formed corrosion scales [J].  Corrosion Science , 2022, 199, 110207.

[8] Yue X, Zhang L, Hua Y, et al. Formation and Evolution of the Corrosion Scales on Super 13Cr Stainless Steel in a Formate Completion Fluid with Aggressive Substances [J].  Frontiers in Materials , 2022, 8 (802136), 579.

[9] Yue X, Zhang L, Hua Y, et al. The role of Cl-in the formation of the corrosion products and localised corrosion of 15Cr martensite stainless steel under an CO2-containing extreme oilfield condition [J].  Corrosion Science , 2022, 194, 109935.

[10] Yue X, Zhang L, Hua Y,, et al. Hypo-toxicity and prominent passivation characteristics of 316 L stainless steel fabricated by direct metal laser sintering in a simulated inflammation environment[J].  Journal of Materials Science & Technology , 2021, 93: 205-220.

[11] Yue X, Cao H, Zhang L, et al. Effect of Aggressive Substance on the Nature of Corrosion Scales Formation on Super 13Cr Stainless Steel in Formate Completion Fluid[100]// CORROSION 2021 . OnePetro, 2021.

[12] Yue X, Zhang L, Hua Y. Fundamental insights into the stabilisation and chemical degradation of the corrosion product scales[J].  npj Materials Degradation , 2021, 5(1): 1-8.

[13] Yue X, Zhang L, Hua Y, Neville A, et al. Influence of a small velocity variation on the evolution of the corrosion products and corrosion behaviour of super 13Cr SS in a geothermal CO2 containing environment [J].  Corrosion Science , 2020: 108983.

[14] Yue X, Zhang L, Hua Y, Neville A, et al. Revealing the superior corrosion protection of the passive film on selective laser melted 316L SS in a phosphate-buffered saline solution [J].  Applied Surface Science , 2020: 147170.

[15] Yue X, Zhang L, Neville A, Hua Y, et al. A thermodynamic and kinetic study of the formation and evolution of corrosion product scales on 13Cr stainless steel in a geothermal environment [J].  Corrosion Science , 2020: 108640.

[14] Yue X, Zhang L, Neville A, Hua Y, et al. Evolution and characterization of the film formed on super 13Cr stainless steel in CO₂-saturated formation water at high temperature[J].  Corrosion Science , 2019: 108277.

[15] Yue X, Zhang L, et al. Correlation between electrochemical properties and stress corrosion cracking of super 13Cr under an HTHP CO₂ environment[J].  RSC advances , 2018, 8(43): 24679-24689.

[16] Yue X, Zhang L, Lu M, et al. Effect of Traces of Dissolved Oxygen on the Passivation Stability of Super 13Cr Stainless Steel Under High CO₂/H₂S Conditions[J].  International Journal of Electrochemical Science , 2017, 12(8):7853-7868.

[17] Larsson A, Simonov K, Eidhagen J, Grespi A, Yue X, et al. In situ quantitative analysis of electrochemical oxide film development on metal surfaces using ambient pressure X-ray photoelectron spectroscopy: industrial alloys [J].  Applied Surface Science , 2022, 155714.

[18] Isotahdon E, Ratia-Hanby V, Huttunen-Saarivirta E, Yue X, Pan J. Corrosion of copper in sulphide containing environment: the role and properties of sulphide films–Annual report 2021.  Nordic Nuclear Safety Research NKS .

[19] Hua Y, Yue X, et al. The evolution and characterisation of the corrosion scales formed on 3Cr steel in CO2-containing conditions relevant to geothermal energy production.  Corrosion Science ,2021, 183, 109342.

[20] Chen Y, Li A, Yue X, et al. Facile fabrication of organic/inorganic nanotube heterojunction arrays for enhanced photoelectrochemical water splitting[J].  Nanoscale , 2016, 8(27): 13228-13235.

[21] Larsson A, Simonov K, Eidhagen J, Grespi A, Yue X, et al. The Oxygen Evolution Reaction Drives Passivity Breakdown for Ni‐Cr‐Mo Alloys[J].  Advanced Materials , 2023: 2304621.

[22] Chen D, Li M, Yue X, Ji Y, Xu Y, Pan J, Dong C. Correlation between pitting susceptibility and surface acidity, point of zero charge of passive film on aluminum: Influence of alloying elements[J].  Corrosion Science ,2024, 227, 111726.

[23] Ratia-Hanby V, Isotahdon E, Yue X, Malmberg P, Leygraf C, Pan J, et al. Characterization of surface films that develop on pre-oxidized copper in anoxic simulated groundwater with sulphide[J].  Colloids and Surfaces A: Physicochemical and Engineering Aspects , 2023, 676, 132214.

[24] Wang C, Guo H, Fang J, Yu S, Yue X, et al. The role of Cr content on the corrosion resistance of carbon steel and low-Cr steels in the CO2-saturated brine[J].  Petroleum Science , 2023, 20 (2), 1155-1168.

[25] Qu Z, Yue X, Li Y, Li X, Hu L, Ren Y, Lv Y, Zhang L. Corrosion Risk Prediction Based on Offshore Pipeline Service Database and Machine Learning Algorithms[100]// AMPP CORROSION,  D041S043R008, 2022.

专利

[1] 岳小琪, 张雷，花勇. 一种用于金属和合金局部腐蚀/点蚀精细评定方法及装置, CN 201911159306.0 [P].(已转化)

[2] 王鲁宁，陈颖芝，岳小琪. 一种无机/有机半导体纳米复合结构及其制备方法和应用，CN 105152122 A [P].

[3] 李大朋, 岳小琪, 等. 用于评价材料的应力腐蚀开裂敏感性的试验用夹具, CN 201620938868.0 [P].